BlogsWHAT ARE THE BEST PRACTICES FOR USING A 'TRIM HEATER' (SMALL ELECTRIC WATER BATH) DOWNSTREAM OF AN AMBIENT VAPORIZER TO GUARANTEE THE FINAL GAS TEMPERATURE DURING A BLIZZARD?
BlogsWHAT ARE THE OPTIMAL PLC AUTOMATION SEQUENCES FOR COOLING DOWN, STARTING, AND STOPPING AN LNG PUMP SKID TO PREVENT OPERATOR ERROR?
BlogsCAN A STANDARD CRYOGENIC SEMI-TRAILER DESIGNED FOR LIN/LOX BE USED SAFELY TO TRANSPORT LIQUID ETHYLENE OR LCO2 WITHOUT MODIFYING THE SEALS AND RELIEF VALVES?
BlogsWHY IS THE TOP PLUMBING RING OF MY CRYOGENIC LIQUID CYLINDER FORMING HEAVY ICE, AND DOES THIS MEAN THE VACUUM HAS FAILED?
BlogsWHAT IS THE STANDARD SURFACE PREPARATION (SHOT BLASTING SA 2.5) AND MARINE-GRADE EPOXY PAINT SYSTEM REQUIRED FOR THE OUTER CARBON STEEL JACKET OF A CRYOGENIC TRAILER OPERATING IN HEAVILY SALTED WINTER ROADS?
BlogsDO HEAVY-DUTY LNG COMPRESSOR SKIDS AND COLD BOXES NEED SPECIFIC WIND LOAD, SNOW LOAD, AND SEISMIC STRUCTURAL CALCULATIONS FOR INSTALLATION IN EARTHQUAKE-PRONE ZONES LIKE CHILE OR JAPAN?
BlogsHOW TO TRANSITION A REGIONAL HOSPITAL FROM USING EXPENSIVE ELECTRIC VAPORIZERS TO A HYBRID SYSTEM USING AMBIENT VAPORIZERS FOR 90% OF THE BASE LOAD.
BlogsHOW TO NEGOTIATE PERFORMANCE GUARANTEES FOR SPECIFIC POWER CONSUMPTION (SPC) WITH A CHINESE AIR SEPARATION UNIT MANUFACTURER?
BlogsHOW TO SAFELY PERFORM A 'TURNDOWN' OPERATION (REDUCING PRODUCTION CAPACITY TO 60%) ON A CONTINUOUS AIR SEPARATION PLANT WITHOUT CAUSING DISTILLATION COLUMN WEEPING?
BlogsWHAT ARE THE EXACT FATIGUE LIFECYCLE TESTING REQUIREMENTS FOR THE STAINLESS STEEL BRAIDED FLEXIBLE HOSES (PIGTAILS) CONNECTING THE HIGH-PRESSURE MANIFOLD TO THE INDIVIDUAL GAS CYLINDERS?
BlogsHOW TO EFFECTIVELY PROTECT THE EXPOSED STRUCTURAL STEEL OF A MASSIVE ASU COLD BOX FROM SEVERE GALVANIC CORROSION IN A SALTY COASTAL ENVIRONMENT?
BlogsWHAT IS THE STANDARD PREVENTIVE MAINTENANCE SCHEDULE (MTBF) FOR THE MAIN AIR COMPRESSOR, MOLECULAR SIEVES, AND CRYOGENIC VALVES ON AN INDUSTRIAL ASU?
BlogsWHAT ARE THE OPTIMAL PLC AUTOMATION SEQUENCES FOR COOLING DOWN, STARTING THE PUMP, AND AUTOMATICALLY STOPPING THE FILL WHEN CYLINDERS REACH 200 BAR?
BlogsHOW TO CALIBRATE OR REPLACE THE MECHANICAL FLOAT-TYPE LIQUID LEVEL GAUGE (E.G., WIKA) ON A PRESSURIZED CRYOGENIC CYLINDER?
BlogsHOW TO TRAIN NEW SITE OPERATORS TO CORRECTLY ADJUST THE PID PARAMETERS ON THE STEAM CONTROL VALVE TO PREVENT TEMPERATURE HUNTING AND OSCILLATION?
BlogsWHAT CAUSES THE PLUMBING CABINET OF A PORTABLE CRYOGENIC TANK TO FREEZE UP DURING RAPID UNLOADING, AND HOW IS IT FIXED?
BlogsWHAT ARE THE DIFFERENCES BETWEEN A CRYOGENIC SEMI-TRAILER APPROVED FOR UN CLASS 2.2 (NON-FLAMMABLE LOX/LIN) VS UN CLASS 2.1 (FLAMMABLE LNG) GASES REGARDING ELECTRICAL SYSTEMS?
BlogsIS IT POSSIBLE TO MANIFOLD (CONNECT IN PARALLEL) FIVE 40FT LNG ISO TANK CONTAINERS AT A TEMPORARY POWER PLANT TO ACT AS A CONTINUOUS BULK STORAGE SYSTEM?
BlogsHOW MUCH MONEY DOES AN INDUSTRIAL GAS DISTRIBUTOR SAVE ANNUALLY BY ADDING AN ARGON RECOVERY COLUMN TO THEIR ASU, ASSUMING GLOBAL LIQUID ARGON PRICES?
BlogsCAN A STANDARD LOX REGASIFICATION & FILLING STATION BE SAFELY USED OR RETROFITTED TO FILL LIQUID NITROUS OXIDE (N2O) CYLINDERS FOR MEDICAL USE WITHOUT MODIFYING THE METALLURGY?
BlogsWHAT IS THE TYPICAL MANUFACTURING LEAD TIME FOR A CUSTOM ORDER OF 3-AXLE ADR-CERTIFIED LIQUID OXYGEN TRANSPORT TRAILERS?
BlogsHOW TO DESIGN THE PRESSURE REGULATING AND METERING SKID (PRMS) TO SAFELY DROP THE NATURAL GAS PRESSURE FROM 10 BAR DOWN TO 100 MBAR FOR A LOW-PRESSURE INDUSTRIAL BOILER WITHOUT CAUSING THE REGULATORS TO FREEZE?
BlogsI NEED TO PITCH A CYLINDER FLEET UPGRADE TO MY BOARD OF DIRECTORS. OUTLINE THE TOP 5 STRATEGIC ADVANTAGES OF OWNING OUR OWN CRYOGENIC CYLINDER FLEET INSTEAD OF PAYING DAILY RENTAL FEES.
BlogsI AM AN EPC CONTRACTOR BUILDING AN L-CNG REFUELING STATION. I NEED A SPECIFICATION SHEET FOR A 250-BAR, AUTOMATED, ATEX-CERTIFIED L-CNG PUMP & VAPORIZER SKID TO SEND TO SUPPLIERS.
BlogsCOMPARATIVE ANALYSIS OF WIKA VS. ROCHESTER MECHANICAL LIQUID LEVEL GAUGES USED ON ASIAN-MANUFACTURED CRYOGENIC CYLINDERS.
BlogsIS IT POSSIBLE TO MANIFOLD (CONNECT IN PARALLEL) TWO SEPARATE 500 KG/H CO2 RECOVERY SKIDS TO DOUBLE THE CAPACITY, AND HOW DO THEIR PLCS SYNCHRONIZE TO HANDLE FLUCTUATING FERMENTATION PEAKS?
BlogsWHAT CAUSES THE MECHANICAL SEAL OF AN LNG CENTRIFUGAL PUMP TO LEAK NATURAL GAS, AND HOW CAN I REPLACE IT SAFELY IN AN ATEX ZONE 1 ENVIRONMENT?
BlogsDRAFT A WARRANTY CLAIM EMAIL TO A SUPPLIER REGARDING AN LNG DISPENSER WHOSE CORIOLIS MASS FLOW METER IS DRIFTING AND CAUSING A 3% BILLING INACCURACY.
BlogsWHAT IS THE OPTIMAL WATER BATH TEMPERATURE SETPOINT (E.G., 60°C OR 80°C) TO MAXIMIZE HEAT TRANSFER WHILE PREVENTING EXCESSIVE SCALING ON THE HEATER RODS?
BlogsWHAT IS THE STANDARD PREVENTIVE MAINTENANCE SCHEDULE (MTBF) FOR INSPECTING THE PUMP PTFE SEALS, MANIFOLD VALVES, AND LOAD CELLS ON AN INDUSTRIAL LCO2 FILLING STATION?
BlogsHOW ARE MANUFACTURERS REDUCING THE TARE WEIGHT OF MICROBULK TANKS WHILE MAINTAINING HIGH WORKING PRESSURES?
BlogsWHAT ARE THE SIL (SAFETY INTEGRITY LEVEL) REQUIREMENTS FOR THE PLC LOGIC AND EMERGENCY STOP BUTTONS MOUNTED ON A FLAMMABLE LNG SKID?
BlogsHOW TO ADDRESS NOISE COMPLAINTS FROM THE PRESSURE-BUILDING REGULATOR OF A PORTABLE TANK INSTALLED NEAR A RESIDENTIAL TEMPORARY MEDICAL FACILITY?
